Chain Type Hydraulic Jacks for Tank Lifting and Tank Construction

• Customization: Available
• After-sales Service: Whole Life
• Warranty: 1 Year
• Type: Hydraulic Jack
• Structure: Hydraulic Jack
• Capacity (Load): 41-50T
• Power Source: Hydraulic
• Max Height: 1500mm to 4000mm
• Certification: CE, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Product Name: Chain Type Hydraulic Tank Jacks
• Packing: Wooden Box
• Use Area: Engineering Construction
• Min Height: 2.6 M
• Application: Lifting Tools
• Customized Support: OEM
• Lifting Height: Adjustable
• Transport Package: Export Package
• Specification: Customized
• Trademark: WINCOO
• Origin: Jiangsu, China

Product Description

Simple Chain Type Hydraulic Jack

PRODUCT OVERVIEW

~ LYT-type hoist is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc.
~ Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of the chain.
~ It applies to inverted installation and construction of various large storage tanks (steel) and various storage tanks.
~ LYT-type chain-type hydraulic hoist includes the following models: LYT-120-2700, LYT-200-2700, and LYT-300-2700 etc. (those with special stroke need to be customized).

 

TECHNICAL PARAMETER

Technical performance parameters of hydraulic pump station
Model	YB-7.2	YB-14.5
Tank volume	220L(700*550*580)	340L(750*650*650)
Rated pressure	25Mpa	25Mpa
Rated flow	7.2L/min	14.5L/min
Power	Three-phase Four-wire (380V)
Control voltage of solenoid valve	220V	220V
Motor drive rate	5.5kw	7.5kw

Technical performance parameters of the hoist
Mode of LYT-type hoist	LYT-120-2700	LYT-200-2700	LYT-300-2700
Rated lifting capacity (KN)	120	200	300
Hydraulic area (mm)	11304	18859.6	25434
Rated oil pressure (MPa)	25	25	25
Piston stroke (mm)	1500	1500	1500
Chain stroke (mm)	2700	2700	2700
Cylinder safety equipment	Double-direction oil-way hydraulic lock
Reinforcement measures	2 adjustable pull rods

 

DETAILED DESCRIPTION

★Operation Principles for Lifting by Inverted Method

1. LYT-type hydraulic hoist is used to firstly lift the tank roof and the top (first layer) siding of the tank. It's required to group weld tank siding when the lifting height of siding exceeds the second siding (the second layer from the top) by 30-50mm, and group weld the third layer (the third layer from the top to the bottom) of the tank after lifting again, lift successively, group weld the siding of the tank layer by layer, until the last layer of siding.

2. LYT-type hydraulic hoist is used for lifting. When oil enters the hydraulic jack, the movable pulley is pushed upward by pressing the piston, thus driving the load-bearing chain to lift the expansion ring. In this way, the whole tank (including tank roof) is lifted up, until it reaches the pre-set height (there is a voidance of the next layer of plate). The siding in this layer is surrounded for butt welding. After the positioning block is welded, hydraulic hoist returns and the lift tank falls back to the newly-surrounded siding. After welding of circular seam and vertical seam, the door-type card for fixing expansion ring is cut off and the expansion ring is released. In this way, the hoist returns and expansion ring falls to the Model of hydraulic pump station.Tank volume Rated pressure Rated flow Power Control voltage of solenoid valve Motor drive rate YB-7.2 220L(700*550*580) 25Mpa 7.2L/min Three-phase Four-wire(380V) 220V 5.5KW YB-14.5 340L(750*650*650) 25Mpa 14.5L/min 220V 7.5KW Mode of LYT-type hoist.Rated lifting capacity (KN) Hydraulic area (mm) Rated oil pressure (MPa) Piston stroke (mm) Chain stroke (mm) Cylinder safety equipment Reinforcement measures LYT-120-2700 120 11304 25 1500 2700 Double-direction oil-way hydraulic lock 2 adjustable pull rods LYT-200-2700 200 18859.6 25 1500 2700 Double-direction oil-way hydraulic lock 2 adjustable pull rods LYT-300-2700 300 25434 25 1500 2700 Double-direction oil-way hydraulic lock 2 adjustable pull rods bottom of tank siding. Then, the next circular plate is expanded and transfer rib plate, such as door-type card, is welded for lifting, and so forth. The group welded tank is lift,until group weld of the last layer of siding, so that the whole storage tank is installed with this inverted method.

★Advantages of Inverted Hydraulic on Improving Large Construction Storage Tank

1. Hydraulic lifting is stable, safe and reliable. Due to the adoption of unified hydraulic control and single or partial (several) adjustment, the whole lifting process is relatively stable. The hoist is provided with synchronizing valve and hydraulic lock to prevent sliding and falling of the tank or heavy loads, which are caused by power failure and fracture of oil tube. Hydraulic lifting is stable, safe and reliable.

2. Construction quality is ensured. As the hoist is provided with synchronizer and adjustable function, lifting height can be controlled accurately. Due to above reasons, quality of the tank is ensured.

3. The equipment is easy to operate. Construction environment is good and work efficiency is high.

4. The equipment is well-adapted. As long as the number of hydraulic hoists is increased or decreased, the whole set of equipment can be applied to the inverted hydraulic lifting construction of large storage tanks with different volumes ranging from several thousand cubic meters to tens of thousands cubic meters.

5. The hydraulic pump station and the hydraulic hoist are placed in the tank for easy operation. Finally, a door-closing plate is reserved to move the equipment out of the storage tank, and the door-closing plate is group welded well.

6. The hydraulic pump station can be controlled singly or jointly, and has strong construction adaptability and excellent technical performance price ratio.

7. Short construction period, low cost and good economic benefit. Due to the high degree of modernization and the fast lifting speed of the complete set of equipment, it has low construction cost and good economic benefit. This technology is truly characterized with convenient and centralized control, simple operation, safety and reliability (no falling), accurate control of weld clearance and lifting height of heavy objects, which can ensure the quality of the project, save labor and reduce costs, and achieve remarkable economic benefits.

 

CONSTRUCTION SITE PHOTOS

 

 

SIMILAR PRODUCTS

 

COMPANY PROFILE

 

  Wincoo Engineering Co.,ltd is a hydraulic machinery manufacturing company integrated with design, development, production and sales, which mainly manufactures LYT-type chain-type hydraulic hoist, SQD unfixing holding-latch hydraulic hoist and supporting products. Such products are mainly used for inverted lifting and installation of steel storage tanks. Founded in 2003, after years of concentrated scientific research and development, the company obtained the patent certificate of "Utility Model Hydraulic Hoist' issued by "China National Intellectual Property Administration", and the right to use the trademark of "WINCOO" in 2008, so as to enable products of Wincoo Engineering Co.,ltd to quickly become Chinese brands.

  Since entering Chinese market for more than 10 years, products of Wincoo Engineering Co.,ltd has been sold in nearly thirty provinces, cities and autonomous regions in China, and some overseas markets. The company has production line of advanced technology; meanwhile, Wincoo Engineering Co.,ltd designs, develops and processes products for famous domestic installation companies. With professional team, strict management and excellent equipment, the company strives to create the brand of "WINCOO",hydraulic hoist and series supporting products. As an expert of hydraulic hoist, WINCOO with charm of high technology is keen,innovative and forging ahead to establish design language of the company. In an all-inclusive and absorbing and open-minded manner, the hydraulic hoist and hydraulic pump station are perfectly combined to form hydraulic lifting equipment (hydraulic jacking equipment). As the founder and disseminator of hydraulic hoist, WINCOO has been building the inverted hydraulic lifting equipment and production technology of Dongfang installation engineering for a long time.

  Wincoo Engineering Co.,ltd is committed to the research and development of LYT-type chain-type hydraulic hoist, SQD-type unfixing holding-latch hydraulic hoist and the supporting equipment. The LYT-type and SQD-series products have been widely used in various projects (inverted lifting, translation, jacking, and climbing, etc.) by major installation companies all over the country, and have achieved satisfactory results.

  WINCOO sticks to improve core competitiveness by virtue of corporate culture, thus setting a good social image of the company during development. "Those hoping to expand the company must study hard from the moment, and the pursuit is endless". "WINCOO" will continuously forge ahead, contributes to the course of installation project in China and permanently moves forward to forge the monument of hydraulic lifting industry in China.